35 Watt, PAR30L, Med. base Flood ceramic metal halide high intensity discharge lamp (ANSI Code M130/O)
Improved color rendering compared to Quartz Metal Halide.
Benefits
• Unaffected by ambient temperature, suitable for indoor and outdoor use
• Better light quality and more efficient than Quartz Metal Halide
• Consistent lamp-to-lamp color
• Cooler beam than halogen
Applications
• Retail
• Display
• Hospitality
Technical Data
• High efficacy
• Improved lumen maintenance
• Faster warm-up and restrike time
• Excellent color rendering compared to standard Metal Halide
Note: The lifetime and performance are based on use with an appropriate electronic ballast.
WARNING: This lamp can cause serious skin burn and eye inflammation from shortwave ultraviolet radiation if outer envelope of the lamp is broken or punctured. Do not use where people will remain for more than a few minutes unless adequate shielding or other safety precautions are used. Lamps that will automatically extinguish when the outer envelope is broken or punctured are commercially available. This lamp complies with FDA radiation performance standard 21 CFR subchapter J.
NoteLamps classified as O-type comply with ANSI standard C78.387 for containment testing and may be used in open luminaries. See lamp warning. Supply voltage must be held to ±5 volts of rated supply voltage. This product contains less than 120 nCi of Kr-85. Turn power off before inspection, installation, or removal. Do not use where directly exposed to water or outdoors without an enclosed fixture. Keep combustible materials away from lamp. Do not exceed rated voltage. Use in fixture rated for this product. Do not use lamp if outer glass is scratched or broken. Use only properly rated ballast.
